Alat Perlengkapan Toko
Home Incinerator

PostHeaderIcon Incinerator

1. Incinerator CAP. 0,5 m3/batch
Double Burner with Scrubber


Spesifikasi :
Kapasitas : 150 Liter, density 0,15 = 22,5 Kg/batch
* Operation Time :8 hour/day
Chamber Volume :
* 1st Chamber : 0.5 m³ ( 80 cm x 80 cm x 80 cm)
* Second Chamber : 0.2 m³ ( L. 31 cm x W. 80 cm x. H.80 cm)
* Incinerator Dimension (Outter)
- Length : 163 cm
- Width : 120 cm
- Height : 122 cm
Burner
* 1st Burner : 5 ~ 10 liter/hour, Light Oil Burner, Qty : 1 unit
* 2nd Burner : 5 ~ 10 liter/hour, Light Oil Burner, Qty : 1 unit
* Motor : 220V / 50 Hz/ 1 Phase: 150 Watt x 2 : 300 Watt
Chamber Temperature :
* 1st Chamber : 800 ~ 1000°C
* 2nd Chamber : 1000 ~ 1200°C
Exhaust Stack dan Scrubber
* Scrubber dia : 450 mm x 1200 mm
* Stack dia : 250 mm
* Height : ± 8 m. from ground level
* Sampling Port : Ø4”
* Coating : High Temp.Paint 600º
Insulation and refractory construction materials :
* Fire Brick : Fire Brick SK 34
* Castable : CAJ-14
* Ceramic Fibre : 128 kg/m³
* Rockwool : 60 kg/m³
* Glasswool : 20 kg/m³
* Bottom : Insulating Brick
Shell & Structure Material Chamber :
* Shell Plate : Mild Steel thickness 4 mm
* Joint Flange : Mild Steel thickness 12 mm
* Burner Port : Mild Steel thickness 10 mm
* Plenum : Mild Steel thickness 6 mm
* Lifter : Mild Steel thickness 12 mm
* Structure : UNP 80 & UNP 50
* Coating : Epoxy Paint
Blower 1 unit
* Type Sentrifugal : Ø3 Inchi, 220V, 370W
* RPM : 3000 / 3600
Diesel Oil Fuel Consumption : average 20 liter / hour
Fuel Tank :
* Tank Capacity : 200 ltr
* Material Tank : Mild Steel thickness 3 mm
* Level Control : Hose Ø1/2”
* Drain Port : Ø1/2”
Water Scrubber : Pump, Piping with Water Tank
Maximum Water Pump Capacity 190 liter/min
Electricity 220 Volt, 50 Hz, 1 Phase, 370 Watt
Power Requirement : 1,2 kW / 220 Volt / 1phase / 50Hz
Control System :
* Electric Control
* Temperature Control : Digital
* Thermocouple : Type – K.
* Limit Switch
Ash : 5 – 10 % waste weight, Depend on Raw Materials
Ash Discharging : Manual
Feeding System : Manual
Operator Requirement : 1 Person
Area Requirement : 4 m x 5 m
Emission Quality According to Government Regulation for the following :
* Smokeless
* CO < 100 mg/Nm3
* NO2 < 300 mg/Nm3
* Opacity < 10%



2. Incinerator CAP. 0,35 m3/batch
Double Burner with Scrubber


Spesifikasi :
Kapasitas : 105 Liter, density 0,15 = 15 Kg/batch
* Operation Time : 8 hour/day
Chamber Volume :
* 1st Chamber : 0.35 m³ ( 68 cm x 68 cm x 76 cm)
* Second Chamber : 0.15 m³ ( L. 31 cm x W. 68 cm x. H.76 cm)
* Incinerator Dimension (Outter)
- Length : 142 cm
- Width : 99 cm
- Height : 98 cm
Burner
* 1st Burner : 5 ~ 10 liter/hour, Light Oil Burner, Qty : 1 unit
* 2nd Burner : 5 ~ 10 liter/hour, Light Oil Burner, Qty : 1 unit
* Motor : 220V / 50 Hz/ 1 Phase: 150 Watt x 2 : 300 Watt
Chamber Temperature :
*1st Chamber : 800 ~ 1000°C
*2nd Chamber :1000 ~ 1200°C
Exhaust Stack dan Scrubber
* Scrubber dia : 450 mm x 1200 mm
* Stack dia : 250 mm
* Height : ± 8 m. from ground level
* Sampling Port : Ø4”
* Coating : High Temp.Paint 600º
Insulation and Refractory Construction Materials :
* Fire Brick : Fire Brick SK 34
* Castable : CAJ-14
* Ceramic Fibre : 128 kg/m³
* Rockwool : 60 kg/m³
* Glasswool : 20 kg/m³
* Bottom : Insulating Brick
Shell & Structure Material Chamber :
* Shell Plate : Mild Steel thickness 4 mm
* Joint Flange : Mild Steel thickness 12 mm
* Burner Port : Mild Steel thickness 10 mm
* Plenum : Mild Steel thickness 6 mm
* Lifter : Mild Steel thickness 12 mm
* Structure : UNP 80 & UNP 50
* Coating : Epoxy Paint
Blower 1 unit
* Type Sentrifugal : Ø3 Inchi, 220V, 370W
* RPM : 3000 / 3600
Diesel Oil Fuel Consumption : average15 liter / hour
Fuel Tank :
* Tank Capacity : 150 ltr
* Material Tank : Mild Steel thickness 3 mm
* Level Control : Hose Ø1/2”
* Drain Port : Ø1/2”
Water Scrubber : Pump, Piping with Water Tank
Maximum Water Pump Capacity 190 liter/min
Electricity 220 Volt, 50 Hz, 1 Phase, 370 Watt
Power Requirement : 1,2 kW / 220 Volt / 1phase / 50Hz
Control System :
* Electric Control
* Temperature Control : Digital
* Thermocouple : Type – K.
* Limit Switch
Ash : 5 – 10 % waste weight, Depend on Raw Materials
Ash Discharging : Manual
Feeding System : Manual
Operator requirement : 1 Person
Area requirement : 3,8 m x 4,8 m
Emission quality according to government regulation for the following :
* Smokeless
* CO < 100 mg/Nm3
* NO2 < 300 mg/Nm3
* Opacity < 10%



3. Incinerator CAP. 0,20 m3/batch
Double Burner with Scrubber


Spesifikasi :
Kapasitas : 60 Liter, density 0,15 = 9 Kg/batch
* Operation time : 8 hour/day
Chamber Volume :
* 1st Chamber : 0.2 m³ ( 55 cm x 55 cm x 70 cm)
* Second chamber : 0.1 m³ ( L. 31 cm x W. 55 cm x. H.70 cm)
* Incinerator dimension (Outter)
- Length : 129 cm
- Width : 86 cm
- Height : 85 cm
Burner
* 1st Burner : 4 ~ 6 liter/hour, Light Oil Burner, Qty : 1 unit
* 2nd Burner : 4 ~ 6 liter/hour, Light Oil Burner, Qty : 1 unit
* Motor : 220V / 50 Hz/ 1 Phase: 150 Watt x 2 : 300 Watt
Chamber Temperature :
* 1st Chamber : 800 ~ 1000°C
* 2nd Chamber : 1000 ~ 1200°C
Exhaust Stack dan Scrubber
* Scrubber dia : 450 mm x 1200 mm
* Stack dia : 250 mm
* Height : ± 8 m. from ground level
* Sampling Port : Ø4”
* Coating : high temp.paint 600º
Insulation and refractory construction materials :
* Fire brick : Fire Brick SK 34
* Castable : CAJ-14
* Ceramic fibre : 128 kg/m³
* Rockwool : 60 kg/m³
* Glaswool : 20 kg/m³
* Bottom : Insulating Brick
Shell & Structure Material Chamber :
* Shell plate : mild steel thickness 4 mm
* Joint Flange : mild steel thickness 12 mm
* Burner Port : mild steel thickness 10 mm
* Plenum : mild steel thickness 6 mm
* Lifter : mild steel thickness 12 mm
* Structure : UNP 80 & UNP 50
* Coating : epoxy paint
Blower 1 unit
* Type Sentrifugal : Ø3 Inchi, 220V, 370W
* RPM : 3000 / 3600
Diesel oil fuel consumption : average12 liter / hour
Fuel Tank :
* Tank Capacity :120 ltr
* Material Tank : Mild Steel thickness 3 mm
* Level Control : Hose Ø1/2”
* Drain Port : Ø1/2”
Water scrubber : pump, piping with water tank
Maximum water pump capacity 190 liter/min
Electricity 220 Volt, 50 Hz, 1 Phase, 370 Watt
Power requirement : 1,2 kW / 220 Volt / 1phase / 50Hz
Control System :
* Electric control
* Temperature control : digital
* Thermocouple : type – K.
* Limit switch
Ash : 5 – 10 % waste weight, depend on raw materials
Ash discharging : Manual
Feeding system : Manual
Warranty term : Six mont (service)
Operator requirement : 1 Person
Area Requirement : 3,5 m x 4,5 m
Emission quality according to government regulation for the following :
* Smokeless
* CO < 100 mg/Nm3
* NO2 < 300 mg/Nm3
* Opacity < 10%



4. Portable Incinerator CAP. 0,08 m3/batch
Double Burner with Scrubber


Spesifikasi :
Kapasitas : 25 Liter, density 0,15 = 3,75 Kg/batch
Chamber Volume :
* 1st chamber : 0,08 m³ (L. 40 cm x W. 80 cm x H. 40 cm)
* Second chamber : 0. 06 m³ (L. 40 cm x W. 50 cm x. H.30 cm)
* Incinerator body dimension (Outter)
- Length : 70 cm
- Width : 80 cm
- Height : 115 cm
LPG / Gas Burner :
* 1st Burner : 4 ~ 6 Kg/hour, LPG, Qty : 1 unit
* 2nd Burner : 4 ~ 6 Kg/hour, LPG, Qty : 1 unit
* Motor : 220V / 50 Hz/ 1 Phase: 150 Watt x 2 : 300 Watt
Chamber Temperature :  
* 1st Chamber : 800 ~ 1000°C
* 2nd Chamber : 1000 ~ 1200°C
Exaust Stack dan Scrubber :
* Scrubber dia : 350 mm x 600 mm stainles steel
* Stack dia : 220 mm stailess steel
* Height : ± 3 m. from ground level
* Sampling port : Ø2”
Insulation and Refractory Construction Materials :
* Fire Brick : Fire Brick SK 34
* Castable : CAJ-14
* Ceramic Fibre : 128 kg/m³
* Glasswool : 20 kg/m³
Shell & Structure Material Chamber :
* Shell plate : mild steel thickness 3 mm
* Burner port : mild steel thickness 8 mm
* Structure : l 50 mm x 50 mm x thicknes 5 mm
* Coating : epoxy paint
Lpg gas consumption :  2 kg gas / day, gas botle excluding
Water scrubber : pump, piping with water tank
Maximum water pump capacity 190 liter/min
Electricity 220 volt, 50 hz, 1 phase, 370 watt
Power requirement : 1 kw / 220 volt / 1phase / 50hz
Control System :
* Electric control
* Temperature control : digital
* Thermocouple : type – k.
* Limit switch
Ash : 5 – 10 % waste weight, Depend on Raw Materials
Ash discharging : Manual
Feeding system : Manual
Operator requirement : 1 Person
Area requirement : 2 m x 2 m
Emission quality according to government regulation for the following :
* Smokeless
* CO < 100 mg/Nm3
* NO2 < 300 mg/Nm3
* Opacity < 10%

 

5. Alat Penghancur Jarum Suntik bagian metalnya
- Body terbuat dari Stainless.

 

 
Telephone

Kantor : 0251-7543316

HP : 0821 1005 8977

HP : 021 1201 5928

Pabrik : 0251-8410261

021-70748483

Kontak Kami

PD. Karya Mitra Usaha

Address : Ring Road Utara No. 134 Taman Yasmin VI, Bogor, Indonesia

Website : www.alatpertanian.net

E-Mail :
alatpertanian@yahoo.com
karyamitrausaha@yahoo.com

Telepon :
0251-7543316 (Hunting)
021-70748483

Fax:
0251-7543 281

Handphone :
0821 1005 8977 Doni
0821 1201 5928 Ronald
0813 83 190 190 Jonny

083829900900 Josef Helmut
082123351143 Niko Silalahi

Customer Services
Visitors Counter
mod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_countermod_vvisit_counter
mod_vvisit_counterToday347
mod_vvisit_counterThis month7349
mod_vvisit_counterAll552941
Pengunjung Online
Kami memiliki 72 Tamu online
Mesin Penepung